Hydraulic Flushing Rig

HYDRAULIC FLUSHING RIG

Chart-Recorder
HYDRAULIC FLUSHING RIG

Zone 1 DNV certified Hydraulic Flushing Unit :
  • Specifications: Flushing rig capable of flushing at pressures of up to 207 bar (3000 psi) using all offshore production type water glycols (eg: HW443, HW540, Castro; Transaqua) and mineral oil.
  • Fluid compatibility: Mineral & synthetic oils, production fluids
  • Electric motor: 22kW, 415 volt 3ph 50Hz
  • Cooler motor: 0.37kW
  • Heater: 2kW
  • Max Pressure: 207 bar (continuous) 3000 psi
  • Maximum Flow: 90ltrs/min
  • Outlet connection: 1” BSP female
  • Reservoir capacity: 230 litres (50 gallons) c/w with the following equipment: a) filter /breather b) sight glass x 3 c) low level switch d) 2kW heater e) 3 micron hydac duplex return line filter f) Magnetic drain plug g) Pump vent line c/w diffuser h) 1” drain ball valve Pump inlet selector valve 100 micron hydac inlet filter Fully adjustable pressure regulating valve, panel mounted Pressure regulating outlet check valve Mahle high pressure carbon steel filter suitable for use with all above fluids & c/w with a 3 micron element, bypass valve and a visual clogging indicator. Flow control valve panel mounted 4” dia, 400 bar/ 5000 psi dual scale vibration damped pressure gauge with 1% accuracy High pressure isolating ball valve ¼” NPT (F) nitrogen injection inlet bulkhead connector on panel Return line isolating ball valve UCC inline flow meter panel mounted Sampling point c/w a needle type isolation valve panel mounted Electrically driven (0.37kW) air blast oil cooler All associated electrical controls suitable for use in a hazardous area
  • Dimensions: 1700mm x 1050mm x 1735mm
  • Approx Weight (Dry): 1025 Kgs (incl slings)